Stereoselektive Synthesen von substituierten Tricarbonyl[tris(methylen)methan]eisen(0)-Komplexen

Stereoselective Syntheses of Substituted Tricarbonyl[tris(methylen)methan]iron(0) Complexes The complexes 3 , 9 , 10 , 22 , and 23 with one, two, and three Me substituents at the tris(methylen)methane moiety have been synthesized from the (acyloxy-1,3-diene)(tricarbonyl)iron(0) complexes 1 , 4 , 5 , 20 , and 21 , respectively, by ionic hydrogenation with BF₃ and Et₃SiH at ?78° in CH₂C1₂. These reductions are completely stereoselective, and their course can be predicted by assuming a dominant stereoelectronic control of the reaction. Formation of the carbocationic intermediates 11 from 4 and 12 from 5 , e.g., takes place only if the dissociating O? C bond is antiperiplanar to the donor C(β)? Fe bond. Fast H-transfer then converts the intermediate 11 to 9 and 12 to 10 . The configurations of 17 and 20 can be deduced from the structure of 22 and those of 18 and 21 from that of 23 . An X-ray structure determination of (1R,4S)camphanoate (?)- 13 derived from alcohol (?)- 7 confirms the configuration of 5 deduced above, The structures of the complexes 9 and 10 , 22 and 23 were determined by their unique NMR spectra. The diastereoisomeric complexes 6 and 7 have been synthesized from aldehyde 8 with MeMgI, the diastereoisomers 17 and 18 analogously from 16 or from methyl ketone 19 by reduction with LiAlH₄. Optically active starting materials (+)- 1 , (?)- 13 , (+)- 20 , and (+)- 21 gave, by ionic hydrogenation, the complexes (?)-(3R)- 3 , (+)-(2S,4S)- 10 , (?)-(R,R, S)- 22 , and (?)-(R,R,R)- 23 respectively, with known absolute configurations.     

Lyotropic liquid-crystalline mesophases of [Zn(H2O)6](NO3)2-C12EO10-CTAB-H2O and [Zn(H2O)6](NO3)2-C12EO10-SDS-H2O systems

The mixture of two surfactants (C12EO10-CTAB and C12EO10-SDS) forms lyotropic liquid-crystalline (LLC) mesophases with [Zn(H2O)6](NO3)2 in the presence of a minimum concentration of 1.75 H2O per C12EO10. The metal ion/C12EO10 mole ratio can be increased up to 8.0, which is a record high metal ion density in an LLC mesophase. The metal ion concentration can be increased in the medium by increasing the CTAB/C12EO10 or SDS/C12EO10 mole ratio at the expense of the stability of the LLC mesophase. The structure and some thermal properties of the new mesophase have been investigated using XRD, POM, FTIR, and Raman techniques.     

Dipodal ferrocene-based adsorbate molecules for self-assembled monolayers on gold

1,1'-Difunctionalised ferrocene derivatives have been studied, which contain groups suitable for chemisorption on gold substrates, namely -NC, -PR(2) as well as a range of sulfur-containing units like -NCS, -SR, and thienyl. Thin films on gold have been fabricated from solution with most of these adsorbate species. Film thickness, composition and structure were investigated primarily by X-ray photoelectron and near-edge X-ray absorption fine-structure spectroscopy. The quality of self-assembled monolayers fabricated from 1,1'-diisocyanoferrocene (1) and 1,1'-diisothiocyanatoferrocene (2) turned out to be superior to that of films based on the other adsorbate species investigated. In addition to the surface coordination behaviour of 1 towards gold substrates, relevant aspects of the molecular coordination chemistry of 1 have also been addressed, including the synthesis and characterisation of [(mu-1){Cr(CO)(5)}(2)], [Ag(2)(mu-1)(2)](NO(3))(2) x H(2)O and [(mu-1)(AuCl)(2)]. The crystal structure of the gold complex is governed by aurophilic interactions and can be taken as a model for the arrangement of 1 in self-assembled monolayers on gold.     

Synthesis of Mesoporous Lithium Titanate Thin Films and Monoliths as an Anode Material for High‐Rate Lithium‐Ion Batteries

Mesoporous Li₄Ti₅O₁₂ (LTO) thin film is an important anode material for lithium‐ion batteries (LIBs). Mesoporous films could be prepared by self‐assembly processes. A molten‐salt‐assisted self‐assembly (MASA) process is used to prepare mesoporous thin films of LTOs. Clear solutions of CTAB, P123, LiNO₃, HNO₃, and Ti(OC₄H₉)₄ in ethanol form gel‐like meso‐ordered films upon either spin or spray coating. In the assembly process, the CTAB/P123 molar ratio of 14 is required to accommodate enough salt species in the mesophase, in which the Li^I/P123 ratio can be varied between molar ratios of 28 and 72. Calcination of the meso‐ordered films produces transparent mesoporous spinel LTO films that are abbreviated as Cxx‐yyy‐zzz or CAxx‐yyy‐zzz (C=calcined, CA=calcined–annealed, xx=Li^I/P123 molar ratio, and yyy=calcination and zzz=annealing temperatures in Celsius) herein. All samples were characterized by using XRD, TEM, N₂‐sorption, and Raman techniques and it was found that, at all compositions, the LTO spinel phase formed with or without an anatase phase as an impurity. Electrochemical characterization of the films shows excellent performance at different current rates. The CA40‐350‐450 sample performs best among all samples tested, yielding an average discharge capacity of (176±1) mA h g^?1 at C/2 and (139±4) mA h g^?1 at 50 C and keeping 92 % of its initial discharge capacity upon 50 cycles at C/2.     

Diels‐alder click reaction for the preparation of polycarbonate block copolymers

The Diels‐Alder reaction as a click reaction strategy is applied to the preparation of well‐defined polycarbonate (PC)‐block copolymers. A well‐defined α‐anthracene‐terminated polycarbonate (PC‐anthracene) is prepared using 9‐anthracene methanol as an initiator in the ring opening polymerization of benzyl 5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐carboxylate in CH₂Cl₂ at room temperature for 5 h. Next, a well‐defined α‐furan protected maleimide‐terminated‐poly(ethylene glycol) (PEG₁₁‐MI or PEG₃₇‐MI), ‐poly(methyl methacrylate) (PMMA₂₆‐MI), and ‐poly(ε‐caprolactone) (PCL₂₇‐MI) were clicked with the PC‐anthracene at reflux temperature of toluene to yield their corresponding PC‐based block copolymers (PC‐b‐PEG, PC‐b‐PMMA, and PC‐b‐PCL). The homopolymer precursors and their block copolymers were characterized by using the GPC, NMR and UV analysis. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Fabrication of mesoporous metal chalcogenide nanoflake silica thin films and spongy mesoporous CdS and CdSe

Mesoporous silica metal oxide (ZnO and CdO) thin films have been used as metal ion precursors to produce the first examples of mesoporous silica metal sulfide (meso-SiO(2) @ZnS, meso-SiO(2) @CdS) or silica metal selenide (meso-SiO(2) @ZnSe, meso-SiO(2) @CdSe) thin films, in which the pore walls are made up of silica and metal sulfide or metal selenide nanoflakes, respectively. A gentle chemical etching with a dilute HF solution of the meso-SiO(2) @CdS (or meso-SiO(2) @CdSe) produces mesoporous cadmium sulfide (meso-CdS) (or cadmium selenide, meso-CdSe). Surface modified meso-CdS displays bright blue photoluminescence upon excitation with a UV light. The mesoporous silica metal oxides are formed as metal oxide nanoislands over the silica walls through a self-assembly process of a mixture of metal nitrate salt-two surfactants-silica source followed by calcination step. The reactions, between the H(2) S (or H(2) Se) gas and solid precursors, have been carried out at room temperature and monitored using spectroscopy and microscopy techniques. It has been found that these reactions are: 1)?taking place through the diffusion of sulfur or selenium species from the top metal oxide layer to the silica metal oxide interface and 2)?slow and can be stopped at any stage to obtain mesoporous silica metal oxide metal sulfide or silica metal oxide metal selenide intermediate thin films.     

Multi-elemental bio-imaging of rat tissue from a study investigating the bioavailability of bismuth from shotgun pellets

In recent years, bismuth has been promoted as a "green element" and is used as a substitute for the toxic lead in ammunition and other applications. However, the bioavailability and toxicity of bismuth is still not very well described. Following a hunting accident with bismuth-containing shots, a bioavailability study of bismuth from metal pellets inoculated into rat limb muscles was carried out. Bismuth could be found in urine and blood of the animals. Bio-imaging using laser ablation ICP-MS of thin sections of the tissue around the metal implant was carried out to find out more about the distribution of the metal diffusing into the tissue. Two laser ablation systems with different ablation cell designs were compared regarding their analytical performance. Low concentrations of bismuth showing a non-symmetrical pattern were detected in the tissue surrounding the metal implant. This was partly an artefact from cutting the thin sections but also bio-mobilisation of the metals of the implant could be seen. An accumulation of zinc around the implant was interpreted as a marker of inflammation. Challenges regarding sample preparation for laser ablation and bio-imaging of samples of diverse composition became apparent during the analysis.     

Rim formation on crystal faces growing in confinement

A crystal face growing from solution while exerting a normal force on a confining surface is often observed to develop a growth rim surrounding a hollow core. The interpretation has been that this is a manifestation of steady state growth due to the balance between the concentration gradient and stress gradient along the confined crystal surface. In this paper, we present experimental results which show that the growth rim is instead formed as a consequence of faceted growth on the confined surface. Steady state growth is not ensured by a gradient in normal stress, but rather a gradient in step density along the crystal face. The loaded crystal surfaces display a high degree of roughness, and the stress is not uniformly distributed across the surface, but transmitted at discrete asperities. We discuss the implications of these findings for the interpretation of previous experimental results, and for the thermodynamics of crystal growth subject to normal stress.